Peristaltické pumpy - Peristaltická čerpadla

Peristaltické pumpy - Peristaltická čerpadla

Praktické, přesné a spolehlivé peristaltické pumpy, které jsou nejkompaktnější v této třídě.

LAMBDA PRECIFLOW - MULTIFLOW - HIFLOW - MAXIFLOW - MEGAFLOW
peristaltické pumpy - představení peristaltických čerpadel

  • Průtok od 0,01 do 60’000 ml/hod.
  • Digitální nastavení rychlosti 1:1000.
  • Nová technologie motoru.
  • Možnost plného dálkového ovládání.
  • Napájení nízkým napětím pro maximální bezpečnost.
  • Možnost napájení z baterie.
  • Výrazně prodloužená životnost hadiček a snížená pulzace. Minimalizované náklady na spotřební materiál i provoz.
  • Programovatelný průtok (až 99 kroků) se spuštěním či zastavením bez použití nějakého časovače.
  • Možnost ovládání pomocí počítačového programu PNet (opce)
  • Sledování reakční kinetiky při použití „PUMP-FLOW INTEGRATOR“.


Unikátní vlastnosti

  • 3 velké válce skládající se z vysoce výkonných korozi odolných plastových ložisek se skleněnými kuličkami.
  • Asymetrické provedení hlavy čerpadla zvyšuje její efektivní průměr
  • Pružiny z nerezové oceli spolu s výstředníky zaručují minimální tlak na hadičku a tak zvyšují její životnost a snižují pulzaci

Česká pumpa překonává světové značky

jak dokládají výrobky společnosti LAMBDA, která vyrábí laboratorní přístroje ve Švýcarsku a České republice.

Výsledkem bohatých zkušeností inovativně promítnutých do vývoje jsou peristaltické pumpy, které kombinují mimořádné vlastnosti s velmi kompaktními rozměry. Speciálně navržený kompresní systém hadiček je umístěný v asymetrické hlavě pumpy a také díky velkému poloměru je k hadičkám mimořádně šetrný. To přináší klíčové výhody jako je maximálně stabilní průtok a velmi dlouhá životnost hadiček. Protože pumpa spolehlivě pracuje i s běžnými silikonovými hadičkami, ušetří brzy na provozních nákladech víc než byly její náklady pořizovací.

Zobrazení aktivity pumpy v kontrolovaných systémech, jako jsou třeba bioreaktory, lze pomocí zabudovaného integrátoru. To přináší nové možnosti sledovat růst kultur a dalších procesních parametrů. Čerpadla LAMBDA jsou opravdu spolehlivými, proto také mají pětiletou záruku (PreciFlow, MultiFlow): www.peristaltic-pumps.eu | www.peristalticpump.info 

Peristaltická pumpa LAMBDA – spolehlivý pracant!

Využití peristaltických pump LAMBDA s integrátorem průtoku - schéma

 

Typ: Microprocessor-controlled programmable laboratory peristaltic pump
Programování: up to 99 steps of speed and time
Časové rozlišení: 0 to 999 minutes in 1 minute steps; 0 to 99.9 minutes in 0.1 minute steps
Přesnost: ± 1%
Reprodukovatelnost: ± 0.2 % (electronics)
Rozsah průtoků:
PRECIFLOW & MULTIFLOW: 0.2 µl/min - 600 ml/h
HIFLOW: 1 µl/min - 3,000 ml/h
MAXIFLOW: 3 µl/min - 10,000 ml/h
MEGAFLOW: 0.02 ml/min - 60,000 ml/h
Hadičky: Silicone tubing or other materials having similar elasticity
Trvalá paměť: storage of all settings
Maximální tlak:
PRECIFLOW, MULTIFLOW, HIFLOW & MAXIFLOW: approx. 0.1 MPa in clockwise rotation; approx. 0.15 MPa in counter-clockwise rotation
MEGAFLOW: approx. 0.18 MPa in clockwise rotation; approx. 0.2 MPa in counter-clockwise rotation
Motor :
PRECIFLOW & MULTIFLOW: microprocessor controlled stepping motor
HIFLOW, MAXIFLOW & MEGAFLOW: microprocessor controlled brushless long life BLDC motor with neodymium magnets
Rozsah regulace rychlosti: 0 - 999
Rozhraní: RS-485 or RS-232 (optional)
Dálkové ovládání: 0-10 V; (option 0-20 or 4-20 mA); foot switch; ON/OFF; ! For safety reasons the voltage of the remote signal to earth must not exceed 48 V DC
Rozměry: 10.5 (W) × 9.5 (H) × 10.5 (D) cm (PRECIFLOW, MULTIFLOW, HIFLOW & MAXIFLOW); 18 (W) x 13 (H) x 16 (D) cm (MEGAFLOW)
Váha: <1 kg (PRECIFLOW & MULTIFLOW); 1.2 kg (HIFLOW & MAXIFLOW); 2.5 kg (MEGAFLOW)
Bezpečnost: CE, meets IEC 1010/1 norm for laboratory instrument
Pracovní teplota: 0 – 40 ⁰C
Pracovní vlhkost: 0-90% RH, not condensing

2021: Polyimide‐foil‐based microfluidic mixing: LAMBDA VIT-FIT syringe pumps with 50-mL syringes (Henke-Ject) for 25 °C preheated feed. 

Bobers, J., Forys, E., Oldach, B. & Kockmann, N. (2021). Application of Polyimide-based Microfluidic Devices on Acid-catalyzed Hydrolysis of Dimethoxypropane. Chem. Ing. Tech. 2021, 93, No. 5, 796–801;
DOI: 10.1002/cite.202000224


2020: Samples (5 mL) were extracted through a PES porous hollow fiber using the LAMBDA PRECIFLOW peristaltic pump in a suspension experiment.

Schroeder, H., Duester, L., Fabricius, A.-L., Ecker, D., Breitung,V. & Ternes, T. A. (2020). Sediment water (interface) mobility of metal(loid)s and nutrients under undisturbed conditions and during resuspension. Journal of Hazardous Materials, 19/03/2020. 
DOI: 10.1016/j.jhazmat.2020.122543


2020: For the production of recombinant cytochrome in a bioreactor, the feed was pumped through a PRECIFLOW peristaltic pump controlled by the process information management system and its addition was monitored gravimetrically.

Hausjell, J., Schendl, D., Weissensteiner, J., Molitor, C., Halbwirth, H. & Spadiut, O. (2020). Recombinant production of a hard-to-express membrane-bound cytochrome P450 in different yeasts—Comparison of physiology and productivity. Yeast. 2020; 37: 217– 226;
DOI: 10.1002/yea.3441


2019: LAMBDA Peristaltic pumps were used with third-party bioreactors for precise pumping of liquids. 

Hofer, A., Kroll, P. & Herwig, C. (2019). Automated sampling and on-line analytics to increase process understanding. Securecell AG, In der Luberzen 29, CH-8902 Urdorf, Switzerland and TU Wien, Gumpendorfer Strasse 1a, A-1060 Wien, Austria.
DOI: 10.13140/RG.2.2.30419.63523


2019: The LAMBDA PRECIFLOW peristaltic pump fits the requirements for substrate feeding in shaking flasks. The pump can convey flow rates between 0.01 and 60 mL h-1.

Wagner, S.G., Mähler, C., Polte, I., von Poschinger, J., Löwe, H., Kremling, A, et al. (2019). An automated and parallelised DIY-dosing unit for individual and complex feeding profiles. Construction, validation and applications. PLoS ONE 14(6): e0217268.
DOI: 10.1371/journal.pone.0217268  


2019: The solution was collected in a new petri dish each minute, resulting in a total of eight samples. A Lambda Preciflow peristaltic pump in combination with transparent silicon tubing (inside ⌀ = 3 mm) was used to create a flow system.

Steendam, R. R. E. & Frawley, J. P. (2019). Secondary Nucleation of Sodium Chlorate: The Role of Initial Breeding. Crystal Growth & Design 2019 19 (6), 3453-3460.
DOI: 10.1021/acs.cgd.9b00317


2018: The best closed reactor was selected, and the flow and contact time operation parameters were optimized for two cycles.The flow was controlled by a MULTIFLOW peristaltic pump

García de Llasera, M.P., León Santiago, M., Loera Flores, E.J., Bernal Toris, D.N., & Covarrubias Herrera, M.R. (2018). Mini-bioreactors with immobilized microalgae for the removal of benzo(a)anthracene and benzo(a)pyrene from water. Ecological Engineering, Volume 121, 2018, Pages 89-98, ISSN 0925-8574. 
DOI: 10.1016/j.ecoleng.2017.06.059


2018: Feed, loop, bleed and harvest peristaltic pumps PRECIFLOW for continuous cultivation of extreme halophiles in customized pilot scale bioreactor

Mahler, N., Tschirren, S., Pflügl, S. & Herwig, CH. (2018). Optimized bioreactor setup for scale-up studies of extreme halophilic cultures. Biochemical Engineering Journal, Volume 130, 2018, Pages 39-46, ISSN 1369-703X.
DOI: 10.1016/j.bej.2017.11.006


2016: Turbidostat composed of two PRECIFLOW peristaltic pumps with RS-232 interface for automated optogenetic regulation of protein production in liquid Escherichia coli cultures

Milias-Argeitis, A., Rullan, M., Aoki, S. et al. (2016). Automated optogenetic feedback control for precise and robust regulation of gene expression and cell growth. Nat Commun 7, 12546.
DOI: 10.1038/ncomms12546


2016: Adaptive feeding strategy with real time signal (Lucullus) controlled feed rate of the PRECIFLOW pump in fed-batch process 

Konakovsky, V., Clemens, C., Müller, M.M., Bechmann, J., Berger, M., Schlatter, S. & Herwig, C. (2016). Metabolic Control in Mammalian Fed-Batch Cell Cultures for Reduced Lactic Acid Accumulation and Improved Process Robustness. Bioengineering 2016, 3, 5.
DOI: 10.3390/bioengineering3010005


2015: MULTIFLOW peristaltic pump was used to evaluate the extraction of lead(II), chromium(III) and copper(II) on a novel adsorbent

Barfi, B., Rajabi, M., Zadeh, M.M. & al. (2015). Extraction of ultra-traces of lead, chromium and copper using ruthenium nanoparticles loaded on activated carbon and modified with N,N-bis-(α-methylsalicylidene)-2,2-dimethylpropane-1,3-diamine. Microchim Acta 182, 1187–1196 (2015).
DOI: 10.1007/s00604-014-1434-z


2014: Digital PRECIFLOW peristaltic pumps were used as feed pump, bleed pump and cell-free harvest pump to maximize the productivity of extreme halophilic archaeon in a bioreactor equipped with an external cell retention system 

Lorantfy, B., Ruschitzka, P. & Herwig, C. (2014). Investigation of physiological limits and conditions for robust bioprocessing of an extreme halophilic archaeon using external cell retention system. Biochemical Engineering Journal, Volume 90, 2014, Pages 140-148, ISSN 1369-703X.
DOI: 10.1016/j.bej.2014.06.004


2014: For DoE experiments 1.0 mol L-1 (NH4)2CO3 was utilized as the nitrogen source and the inflow was controlled gravimetrically at designated pump set-points by PRECIFLOW peristaltic pump

Bernacchi, S., Rittmann, S., Seifert, A. H., Krajete, A. & Herwig, C. (2014). Experimental methods for screening parameters influencing the growth to product yield (Y(x/CH4)) of a biological methane production (BMP) process performed with Methanothermobacter marburgensis. AIMS Bioengineering, 2014, 1(2): 72-87.
DOI: 10.3934/bioeng.2014.2.72


2014: Feed flow rate was kept constant by controlling the speed of the PRECIFLOW peristaltic pump in continuous culture of Methanothermobacter marburgensis

Seifert, A.H., Rittmann, S. & Herwig, C. (2014). Analysis of process related factors to increase volumetric productivity and quality of biomethane with Methanothermobacter marburgensis. Applied Energy, Volume 132, 2014, Pages 155-162, ISSN 0306-2619.
DOI: 10.1016/j.apenergy.2014.07.002


2014: MULTIFLOW peristaltic pump and a polytetrafluoroethylene (PTFE) column (25 mm x 7.0 mm i.d.) were used to study the suitability of hybrid SiO2/TiO2-NH2 nanoparticles for solid phase extraction of lead, copper, and zinc from different food and water samples

Rajabi, M., Barfi, B., Asghari, A. et al. (2015). Hybrid Amine-Functionalized Titania/Silica Nanoparticles for Solid-Phase Extraction of Lead, Copper, and Zinc from Food and Water Samples: Kinetics and Equilibrium Studies. Food Anal. Methods 8, 815–824 (2015).
DOI: 10.1007/s12161-014-9964-x


2014: LAMBDA MULTIFLOW peristaltic pump used to examine the influence of eluent flow rate (1.0– 6.0 mL/min) in highly selective solid phase extraction 

Rajabi, M., Mohammadi, B., Asghari, A., Barfi, B. & Behzad, M. (2014). Nano-alumina coated with SDS and modified with salicylaldehyde-5-sulfonate for extraction of heavy metals and their determination by anodic stripping voltammetry. Journal of Industrial and Engineering Chemistry, Volume 20, Issue 5, 2014, Pages 3737-3743, ISSN 1226-086X.
DOI: 10.1016/j.jiec.2013.12.073


2014: The influent medium was pumped using PRECIFLOW pumps to the columns containing Dehalococcoides for PCE bioremediation 

Lacroix, E., Brovelli, A., Maillard, J., Rohrbach-Brandt, E., Barry, D.A. & Holliger, C. (2014). Use of silicate minerals for long-term pH control during reductive dechlorination of high tetrachloroethene concentrations in continuous flow-through columns. Science of The Total Environment, Volumes 482–483, 2014, Pages 23-35, ISSN 0048-9697.
DOI: 10.1016/j.scitotenv.2014.02.099


2014: LAMBDA MULTIFLOW Peristaltic Pump used to study the effect of flow rate on the analytes retention in range of 1.0 - 6.0 ml/min and eluent flow rate from 0.5 to 2.0 ml/min 

Rajabi, M., Mohammadi, B., Asghari, A., Barfi, B. & Behzad, M. (2014). Nano-alumina coated with SDS and modified with salicylaldehyde-5-sulfonate for extraction of heavy metals and their determination by anodic stripping voltammetry. Journal of Industrial and Engineering Chemistry, Volume 20, Issue 5, 2014, Pages 3737-3743, ISSN 1226-086X.
DOI: 10.1016/j.jiec.2013.12.073


2013: LAMBDA HIFLOW peristaltic pump with Tygon R-3603 tubing used to pump the porewater in each chamber to the surface and sampled under a high-flow Ar stream 

Yuheng, W., Frutschi, M., Suvorova, E., Phrommavanh, V., Descostes, M., Osman, A. AA., Geipel, G. & Bernier-Latmani, R. (2013). Mobile uranium(IV)-bearing colloids in a mining-impacted wetland. Nat Commun 4, 2942 (2013).
DOI: 10.1038/ncomms3942 


2013: LAMBDA MULTIFLOW pumped the simulated waste water containing dissolved dye through the reactor with the immobilized TiO2 to study the degradation of textile dyes 

Šíma, J. & Hasal, P. (2013). Photocatalytic Degradation of Textile Dyes in aTiO2/UV System. Chemical Engineering Transactions, 2013, 32, 79-84. Department of Chemical Engineering, Institute of Chemical Technology, Prague, Czech Republic.
www.aidic.it/cet/13/32/014.pdf (31. Mai 2021)


2013: Feed Pump: Medium was continuously supplied to the bioreactor by PRECIFLOW peristaltic pump with controlled flow to obtain the desired dilution rate (D) 

Martinez-Porqueras, E., Wechselberger, P. & Herwig, C. (2013). Effect of medium composition on biohydrogen production by the extreme thermophilic bacterium Caldicellulosiruptor saccharolyticus. International Journal of Hydrogen Energy, Volume 38, Issue 27, 2013, Pages 11756-11764, ISSN 0360-3199. 
DOI: 10.1016/j.ijhydene.2013.06.124


2013: Feed pump: In a continuous mode of culture, the medium was supplied by PRECIFLOW peristaltic pump operated on controlled set-points for designated dilution rates (D). 

Martinez-Porqueras, E., Rittmann, S. & Herwig, C. (2013). Analysis of H2 to CO2 yield and physiological key parameters of Enterobacter aerogenes and Caldicellulosiruptor saccharolyticus. International Journal of Hydrogen Energy, Volume 38, Issue 25, 2013, Pages 10245-10251, ISSN 0360-3199. 
DOI: 10.1016/j.ijhydene.2013.06.021


2013: PRECIFLOW Peristaltic Pump was used to supply feed medium into the bioreactor and the feed flow rate was kept constant by controlling the pump speed to get a medium dilution rate (D) of 0.05 per hour (h-1

Seifert, A.H., Rittmann, S., Bernacchi, S. & Herwig, C. (2013). Method for assessing the impact of emission gasses on physiology and productivity in biological methanogenesis. Bioresource Technology, Volume 136, 2013, Pages 747-751, ISSN 0960-8524. 
DOI: 10.1016/j.biortech.2013.03.119


2012: PRECIFLOW pump continuously supplied medium with controlled set-points for designated medium dilution rates of Methanothermobacter marburgensis grown in continuous cultures 

Rittmann, S., Seifert, A. & Herwig, C. (2012). Quantitative analysis of media dilution rate effects on Methanothermobacter marburgensis grown in continuous culture on H2 and CO2. Biomass and Bioenergy, Volume 36, 2012, Pages 293-301, ISSN 0961-9534. 
DOI: 10.1016/j.biombioe.2011.10.038


2012: Ensure column saturation with upward flow by MULTIFLOW pumps 

Maya, C. C., Younga, L., Worsfolda, P. J., Heath, S., Bryan, N. D. & Keith-Roacha, M. J. (2012). The effect of EDTA on the groundwater transport of thorium through sand. Water Res. 2012 Oct 1;46(15):4870-82. Epub 2012 Jun 28. PMID: 22796006.
DOI: 10.1016/j.watres.2012.06.012


2011: Flexible polyethylene tube for PRECIFLOW feed pump used in the optimal growth of algae 

Legendre, A. & Desmazieres, N. (2011). Device for Cultivating Algae and/or Microorganisms for Treating an Effluent and Biological Frontage. United States Patent Application 20110318819.
patents.google.com/patent/EP2367926A2 (1. June 2021)


2011: LAMBDA Peristaltic pump was used to induce the milk flow into the Teflon chamber with stainless steel chips (at flow rate of 340 mL/h and 980 mL/h) to study Staphylococcus epidermidis adherence 

Jaglic, Z., Cervinkova, D., Michu, E. et al. (2011). Effect of milk temperature and flow on the adherence of Staphylococcus epidermidis to stainless steel in amounts capable of biofilm formation. Dairy Science & Technol. 91, 361–372 (2011).
DOI: 10.1007/s13594-011-0017-6


2010: LAMBDA PRECIFLOW peristaltic pump used as feed pump for glycerol during fermentation of E. coli and for producing chitin beads

Lavallaz, G. & Crelier, S. (2010). Purification de GFP avec et sans marqueur d'affinité. Diploma thesis, HES-SO Valais, Sion.
https://doc.rero.ch/record/22518 (03. June 2021) 


2009: Sample additions into the silica microbeads packed optically transparent silica capillary were performed using an RS485 LAMBDA Peristaltic Pump at a flow rate of 0.5 ml/ hour 

Scarmagnani, S., Walsh, Z., Lopez, F. B., Slater, C., Macka, M., Paull, B. & Diamond, D. (2009). Photoswitchable Stationary Phase Based on Packed Spiropyran Functionalized Silica Microbeads. e-J. Surf. Sci. Nanotech. Vol. 7 (2009) 649-652.
DOI: 10.1380/ejssnt.2009.649


2008: Two computer-controlled programmable LAMBDA HiFLOW peristaltic pumps were used for gradient generation for the purification of isolated human islets

Friberg, A.S., Ståhle, M., Brandhorst, H., Korsgren, O. & Brandhorst, D. (2008). Human islet purification utilizing a semi-closed automated pump system. Cell Transplant. 2008;17(12):1305-13. 
DOI: 10.3727/096368908787648100


2007: Injection of different samples using the Lambda MULTIFLOW peristaltic pumps 

Stjernlöf, A. (2007). Portable capillary electrophoresis system with LED-absorbance photometric and LED-induced fluorescence detection. Thesis for the degree in Master of Science, Analytical Chemistry, performed at Dublin City University 2007. 
kau.diva-portal.org/smash/get/diva2:5248/FULLTEXT01.pdf (01. June 2021)


2007: Programmed MULTIFLOW feed pump to auto-regulate oxygen consumption and temperature 

Vanags, J., Rychtera, M., Ferzik, S., Vishkins, M. & Viesturs, U. (2007). Oxygen and Temperature Control during the Cultivation of Microorganisms using Substrate Feeding. Engineering in Life Sciences, 2007, Volume 7, Issue 3, pages 247–252.
DOI: 10.1002/elsc.200620184


2007: LAMBDA PRECIFLOW feed & harvest pumps for animal cell perfusion culture with spin-filter 

Vallez-Chetreanu, F., Fraisse Ferreira, L.G., Rabe, R., von Stockar, U. & Marison, I.W. (2007). An on-line method for the reduction of fouling of spin-filters for animal cell perfusion cultures. Journal of Biotechnology, Volume 130, Issue 3, 2007, Pages 265-273, ISSN 0168-1656.
DOI: 10.1016/j.jbiotec.2007.04.007


2006: LAMBDA PRECIFLOW peristaltic pumps were used to feed the medium into the reactor and withdrew the perfusate from the spin–filter to study the animal cell retention 

Vallez-Chetreanu, F. (2006). Characterization of the mechanism of action of spin-filters for animal cell perfusion cultures. PhD diss. NO 3488, École Polytechnique Fédérale de Lausanne, Switzerland. 
https://infoscience.epfl.ch/record/78660/files/EPFL_TH3488.pdf (1. Juni 2021)


2003: PRECIFLOW peristaltic pump was used as a feed pump in fed-batch and continuous cultures  to maintain a constant dilution rate (D) of yeast Saccharomyces cerevisiae 

Stark, D., Zala, D., Münch, T., Sonnleitner, B., Marison, I.W. & von Stockar, U. (2003). Inhibition aspects of the bioconversion of l-phenylalanine to 2-phenylethanol by Saccharomyces cerevisiae. Enzyme and Microbial Technology, Volume 32, Issue 2, 2003, Pages 212-223, ISSN 0141-0229.
DOI: 10.1016/S0141-0229(02)00237-5


2003: PRECIFLOW Peristaltic Pump was used as a feed pump for the production of 2-phenylethanol (PEA) by in situ product removal (ISPR) method 

Stark, D., Kornmann, H., Munch, T., Sonnleitner, B., Marison, I. W. &  von Stockar, U. (2003). Novel Type of In Situ Extraction: Use of Solvent Containing Microcapsules for the Bioconversion of 2-Phenylethanol from L-Phenylalanine by Saccharomyces cerevisiae. Biotechnol Bioeng. 2003 Aug 20; 83(4):376-85.
DOI: 10.1002/bit.10679


1998: pH kept at 4 by the controlled addition of acid or base using a LAMBDA PRECIFLOW peristaltic pump to estimate the biomass production by pH control analysis 

Vicente, A., Castrillo, J. I, Teixeira, J. A. & Ugalde, U. (1998). On-line estimation of biomass through pH control analysis in aerobic yeast fermentation systems. Biotechnol Bioeng. 1998 May 20; 58(4):445-50.
DOI: 10.1002/%28SICI%291097-0290%2819980520%2958%3A4%3C445%3A%3AAID-BIT12%3E3.0.CO%3B2-A


1994: Feed pump: Concentrated nutrient solutions was fed by LAMBDA Peristaltic Pump for the production of Erythromycin from the strain Saccharopolyspora erythraea in fed-batch 

Potvin, J. & Péringer, P. (1994). Ammonium regulation in Saccharopolyspora erythraea. Part II: Regulatory effects under different nutritional conditions. Biotechnol Lett 16, 69–74 (1994). 
DOI: 10.1007/BF01022626


1995: PRECIFLOW Peristaltic Pump was used to maintain constant pH for the accurate quantitative determination of net proton production or consumption in chemostat cultures of Candida utilis 

Castrillo, J. I., De Miguel, I. & Ugalde, U. O. (1995). Proton Production and Consumption Pathways in Yeast Metabolism. A Chemostat Culture Analysis, Yeast Vol. 11: 1353-1365 (1995)
DOI: 10.1002/yea.320111404


1993: pH was maintained at 3.5 (±0.01) by LAMBDA PRECIFLOW peristaltic pump in whey chemostat culture 

Castrillo, J.I. & Ugalde, U.O. (1993). Patterns of energy metabolism and growth kinetics of Kluyveromyces marxianus in whey chemostat culture. Appl Microbiol Biotechnol 40, 386–393 (1993). 
DOI: 10.1007/BF00170398


Jaký je rozsah průtoků?

V závislosti na peristaltické pumpě, kterou si vyberete, nabízejí naše pumpy rozsah průtoků od 0,2 µl/min do 60 000 ml/hod.


 Je průtok reverzibilní?

Ano. Požadovaného průtoku lze dosáhnout buď po směru hodinových ručiček, nebo proti směru hodinových ručiček.


 Můžete mi prosím poskytnout informace o přesnosti dávkování peristaltické pumpy Lambda?

Přesnost čerpadel je přibližně ± 1% a reprodukovatelnost je ± 0,2% (elektronika). Krokový motor nebo BLDC motor, poháněný elektronikou řízenou křemenem, zajišťuje vysokou přesnost průtoku.


 Jak mohu nekalibrovat průtok v peristaltických pumpách?

Kalibraci průtoku pumpou s danou rychlostí otáčení lze provést zjištěním množství čerpané kapaliny. To lze provést dvěma způsoby: objemovou kalibrací průtoku peristaltickou pumpou nebo kalibrací průtoku pumpou podle hmotnosti. Krátké video ohledně kalibrace průtoku peristaltickou pumpou lze nalézt zde: https://www.lambda-instruments.com/peristaltic-pumps/#video


 Nabízíte vícekanálové pumpy?

Nevyrábíme vícekanálové peristaltické pumpy. Protože u vícekanálových pump není možné dosáhnout přesných a reprodukovatelných průtoků pouze s jedním motorem pumpy. Pro dosažení vysoké přesnosti průtoku se nedoporučuje používat vícekanálové peristaltické pumpy.

Pokud dojde k zablokování jednoho kanálu, celý projekt je znehodnocen. Doporučujeme mít raději jednotlivé pumpy.


 Proč je vhodnější raději používat jednotlivé LAMBDA peristaltické pumpy než vícekanálové pumpy?

Mají více výhod oproti vícekanálovým pumpám. Nejdůležitější věcí, kterou je třeba vzít v úvahu, je přesný, reprodukovatelný a stabilní průtok.

Pokud dojde k zablokování jednoho kanálu, celý projekt může být znehodnocen. Potřebné místo pro ekvivalentní počet jednotlivých LAMBDA peristaltických pump je stejné jako pro vícekanálovou peristaltickou pumpu díky kompaktní struktuře peristaltické pumpy LAMBDA.


 Máte pumpy na skladě?

Ano, pumpy máme na skladě. Máme dostatečné zásoby na skladě, abychom byli schopni odeslat zboží v požadované konfiguraci v co nejkratším čase.